Schacht Standard Floor Loom
Schacht Standard Floor Loom
Available in 36” or 45” weaving widths.
Free Shipping - Click for Details - Use Code FreeShip
Eight or Four Now-Four Later* shaft options. The number of shafts you choose will depend on the kind of weaving you intend to do. Though most weave structures can be woven on four shafts, additional shafts increase your pattern options extensively. If you have a keen interest in pattern drafting and weave structures, eight shafts will allow you to fully develop this interest.
The Schacht Standard floor loom has an under-slung jack mechanism to raise the shafts. The jacks pivot from two points equidistant from the center and lift the shafts by pushing up on the center point. Employs a parallel lamm system which gives the loom a light treadling action. Because of this parallel lamm, it isn’t necessary to adjust the tie-up cords.
The tie-up system is quick and easy to use. Pre-measured nylon tie-up cords hang from the lamms and are attached to a treadle by sliding the appropriate cords into the treadle slot. This makes changing tie-ups very fast.
Other special features of Schacht Standard floor looms include: friction reducing aluminum shaft channels, a back beam which folds with or without a warp on the loom, removable back and breast beams, and an adjustable open-sided beater. The braking system employs a ratchet and dog on the cloth beam and a friction brake on the warp beam. This combination give you precise tension control at all times. High Castle, includes a storage tray.
*”Four Now – Four Later” (4N4L) is an eight harness loom shipped with only four harnesses installed, but with the capacity to add an additional four harnesses. You can purchase a kit to add four harnesses at a later time. 4N4L looms are shipped with all the heddles, tie-ups and other items normally included with an eight harness loom.
Floor Loom Options: Stainless Reed, 10 Treadles, Sectional Beam, Loom Trap. Double back beam, Raddle. Shuttles, etc. If you would like to add any of these options to your loom order, leave message when ordering and be invoiced total due. Loom options subject to shipping costs if not ordered with loom.Contact Elizabeth with your order.
Loom will ship direct from Schacht in Colorado. Looms are made to order just for you, expect ship delay.
Schacht Ship Delay approx 5 weeks. Click Here for current status
36" STANDARD FLOOR LOOM
Overall Width: 44″
Height at Breast Beam: 32″
Height High Castle: 46″
Depth Open: 38″
Depth Folded: 26″
Weight 8-Shaft: 125lb
Weight 4Now-4Later: 110lb
Weight High Castle: +10lb
Weight 4Later Kit: +27lb
Heddles-8 Shaft: 1000
Heddles 4Now-4Later: 1000
45" STANDARD FLOOR LOOM
Overall Width: 53″
Height at Breast Beam: 32″
Height High Castle: 46″
Depth Open: 38″
Depth Folded: 26″
Weight 8-Shaft: 141lb
Weight 4Now-4Later: 125lb
Heddles-8 Shaft: 1000
Heddles 4Now-4Later: 1000